Huawei OptiXstar P885E-10 Campus Access 10 Gigabit PoE ONU
- Classification:Huawei optical terminal equipment
- Release time:2025-11-24
- Page views:0
Huawei OptiXstar P885E-10 Campus Access 10 Gigabit PoE ONU
- Classification:Huawei optical terminal equipment
- Release time:2025-11-24
- Page views:0
The Huawei OptiXstar P885E-10 is a rack-mounted PoE ONU. On the network side, it supports two XGS-PON Pro/XGS-PON uplink ports, and on the user side, it supports 24 2.5GE (PoE++) interfaces. It is suitable for data, video services, and AP transport in campus scenarios, bringing users a high-quality service experience.
1. Ultra-broadband access
• XGS-PON Pro access, supporting line speeds of up to 12.5Gbps.
• PON uplink load sharing can support 25G uplink.
• 24 2.5GE ports, supporting PoE++ and Wi-Fi 7 AP access.
2. High reliability
• Two XGS-PON Pro ports for uplink, supporting Type-C networking protection, ensuring high reliability.
• Supports dual power supplies
3. High security
• 802.1x certification assuranceDevice access security
• ONU port-level hard isolation: One ONU can securely connect to multiple networks via different ports through hard isolation technology.
Technical parameters
| parameter | Huawei OptiXstar P885E-10 |
| Dimensions (width × depth × height) | 440mm×420mm×43.6mm (without ear loops) |
| Network side interface | 2 x XGS-PON Pro/XGS-PON (BOB) |
| User-side interface | 24 x 2.5GE, support PoE++/PoE+/PoE |
| Operating ambient temperature | -10°C ~ +55°C |
| Power adapter rated input range | 200V～240V AC，50/60Hz，8A |
| Power specifications | • 1* 600W • 1* 1000W • 2* 1000W It supports hot-swapping and can be configured with backup mode or maximum load mode when using dual power supplies. |
| Static power consumption | 44W |
| PoE output power | Each PoE++ port supports a maximum of 60W. PoE maximum total output power: • 520W (1 * 600W power supply) • 880W (1 * 1000W power supply) • 1760W (2 * 1000W power supply) |
| Maximum power consumption | • 636W (PoE load 520W, 1 * 600W power supply) • 67W (without PoE, 1 * 600W power supply) • 1047W (PoE load 880W, 1*1000W power supply) • 70W (without PoE, 1 * 1000W power supply) • 2059W (PoE load 1760W, 2*1000W power supply) • 76W (without PoE, 2 * 1000W power supply) |
| Heat dissipation method | Fan cooling |
| Installation method | Supports installation in 19-inch racks and cabinets. |
| weight | 5.72kg (1*600W power supply) 5.56kg (1*1000W power supply) 6.48kg (2*1000W power supply) |
| PON interface | • Interface mode: XGS-PON Pro Interface type: SC/UPC Transmission rates: 12.44 Gbit/s uplink, 12.44 Gbit/s downlink Receiver sensitivity: -22dBm Overload optical power: -7dBm • Interface mode: XGS-PON Interface type: SC/UPC Transmission rates: 9.953 Gbit/s uplink, 9.953 Gbit/s downlink Receiver sensitivity: -28dBm Overload optical power: -8dBm |
| 2.5GE interface | • Complies with standard: IEEE 802.3 • Supports 10/100/1000/2500 Mbit/s adaptive speed • Supports negotiation and configuration of half-duplex/full-duplex modes. • VLAN tag/tag stripping, VLAN pass-through, and filtering via Ethernet port • Supports PoE++/PoE+/PoE functionality |
| Safety | • MAC authentication, 802.1x authentication, MAB authentication, and dynamic distribution of user policies (VLAN, ACL). • DoS attack protection / ARP attack protection • Static MAC address binding, IP address binding • Device access control • ONU port-level hard isolation: One ONU can securely connect to multiple networks via different ports through hard isolation technology. |
| Network protection | • Type B Single-homing protection • Type B Dual-homing protection • Type C Single-homing protection • Type C Dual-homing protection • PON Uplink Load Sharing |
