OptiXstar P882E Campus Access PoE ONU
- Classification:Huawei optical terminal equipment
- Release time:2025-11-24
- Page views:0
OptiXstar P882E Campus Access PoE ONU
- Classification:Huawei optical terminal equipment
- Release time:2025-11-24
- Page views:0
Huawei's OptiXstar P882E product is an ONU device designed for campus scenarios such as education, healthcare, government, and enterprises. On the network side, it supports XGS-PON uplink, and on the user side, it provides four GE interfaces and one 2.5GE interface, bringing users a high-quality voice, data, Wi-Fi 7 bearer, and high-definition video service experience.
1. Ultra-broadband access
• XGS-PON access, supporting 10 Gigabit Ethernet indoors
• 2.5GE interface, supports PoE+, supports Wi-Fi 7 AP access.
2. Multi-network convergence
• Supports ONU port-level hard isolation, allowing different ports of a single ONU to securely connect to multiple networks via hard isolation technology.
3. High reliability and high security
• Supports Type B networking protection with high reliability
• 802.1x authentication ensures secure device access.
Specifications
| parameter | OptiXstar P882E |
| Dimensions (width × depth × height) | 220mm x 150mm x 43.6mm (excluding feet) |
| Network side interface | 1*XGS-PON |
| User-side interface | 4*GE + 1*2.5GE, all supporting PoE/PoE+ |
| Operating ambient temperature | -5°C ~ +45°C |
| Working environment humidity | 5% RH ~ 95% RH, non-condensing |
| Lightning protection specifications | GE: Common Mode 4kV AC power supply: 4kV common mode, 4kV differential mode |
| Power adapter rated input range | 100 ～ 240V AC，50/60 Hz |
| Power supply for the whole machine | 54V/56V DC，2.67A |
| PoE output power | The total output power is up to 60W, and each PoE port supports a maximum of 30W. |
| Static power consumption | 6.4W |
| Maximum power consumption | 10W (without PoE) 78W (PoE with 60W load) |
| Installation method | Supports indoor applications only; can be placed flat on a desktop, wall-mounted, or installed in a network box. |
| XGS-PON interface | • Interface type: SC/UPC • Compliant with G.9807.1 protocol • Class N1/N2 • Receiver sensitivity: -28dBm • Overload optical power: -9dBm • Transmission rates: 9.953 Gbit/s downlink, 9.953 Gbit/s uplink |
| GE interface | • RJ-45 interface • Complies with standard: IEEE 802.3 • Supports 10/100/1000 Mbit/s adaptive speed • Supports negotiation and configuration of half-duplex/full-duplex modes. • VLAN Tag/Tag Stripping Based on Ethernet Port • Supports PoE and PoE+ functions |
| 2.5GE interface | • RJ-45 interface • Complies with standard: IEEE 802.3 • Supports 10/100/1000/2500 Mbit/s adaptive speed • Supports negotiation and configuration of half-duplex/full-duplex modes. • VLAN Tag/Tag Stripping Based on Ethernet Port • Supports PoE and PoE+ functions |
| Safety | • MAC authentication, 802.1x authentication, MAB authentication, and dynamic distribution of user policies (VLAN, ACL). • IPv6/IPv4 firewall • MAC address filtering / IP address filtering / URL filtering • DoS attack protection / ARP attack protection • Static MAC address binding • Device access control • ONU port-level hard isolation: One ONU can securely connect to multiple networks via different ports through hard isolation technology. |
| multicast | • IGMP v2/v3 snooping • Dynamically controllable multicast • IGMP proxy • MLDv1/MLDv2 snooping |
| QoS | • Ethernet port rate limiting • 802.1p priority • SP/WRR/SP+WRR |
| Network protection | • Type B Single-homing protection • Type B Dual-homing protection |
